SHARE

New Ingeo Grades for Fibers and Nonwovens Deliver Lower Shrinkage, Faster Crystallization, and Higher Melting Points

NatureWorks is now in full commercial production of two new high performance Ingeo grades designed for fibers and nonwovens applications.

MINNETONKA, Minn., September 26, 2013 – NatureWorks announced today the commercial availability of two new Ingeo™ high performance biopolymer grades designed for fibers and nonwovens applications. The two grades deliver lower shrinkage, faster crystallization, and higher melting points across the broad range of manufacturing processes used to produce fibers and nonwoven fabrics.

new Ingeo fiber grades

The new grades broaden the application window for Ingeo use in the production of personal care and hygiene products, filtration media, medical fabrics, civil engineering fabrics (erosion control, reservoir lining protection, etc.), and geotextile and agricultural fabrics.

Ingeo 6100D is a mid viscosity grade designed for spunbond nonwoven and conventional staple fiber/filament melt spinning applications, while Ingeo 6260D is a low viscosity grade designed primarily for melt blown nonwoven applications. Both grades offer the highest melting points and fastest crystallization rates in the Ingeo fiber grade resins portfolio.

"These new Ingeo grades provide benefits across all processing technologies and in a more extensive range of applications," said Robert Green, fibers and nonwovens industry global segment manager, NatureWorks. "These grades are the result of intensive research and development and significant long-term investments in state-of-the-art production processes. These new grades are the first of a number of next generation solutions."

Key features and benefits of Ingeo 6100D and 6260D

The reduced shrinkage of Ingeo fibers made from 6100D and 6260D leads to improved fabric dimensional stability. These grades deliver increased hydrolysis resistance, and offer ~ 30% higher stiffness (modulus) at temperatures above their glass transition temperature. Both are capable of higher heat set temperatures, leading to higher melting/sticking points during processing and use. Higher melting point creates advantages in bi-component systems in which the new grades are combined with existing Ingeo low melting point resins. All of these attributes contribute to a larger overall Ingeo processing window and greater ease of processing.

Spunbond & Fibers Performance

When new Ingeo 6100D is compared to the existing Ingeo grade 6202D, one of the most often applied grades for fibers and spunbond nonwovens, NatureWorks scientists found:

  • Peak melting point increased by 8°C from 164° to 172°
  • Melting shoulder increased by 15°C
  • Fiber crystallinity increased by ~20%
  • Quiescent crystallization rate increased three to four times
  • Lower stress required for stress induced crystallization

In spunbond applications the fibers made from new Ingeo grade 6100D show a high strength to weight ratio with fibers in the 15-35 micron diameter range. These spunbond attributes make the new grades ideal for fabrics in geotextile, medical, automotive, and hygiene applications.

Meltblown Performance

New 6260D grade for melt blown applications can generally produce fibers in the 2-7 micron diameter range with desirable attributes for a broad range of applications and products. Resultant fiber characteristics can be translated into attributes such as low pressure drop for filtration media, or softness for hygiene applications. Nonwovens shrinkage in melt blown fabric applications will be ~ 80% less than what was previously achievable.

For more information on the new high performance grades Ingeo 6100D and 6260D, email NatureWorks at inquiry@natureworks.com and for general information visit www.natureworksllc.com. A sampling of current Ingeo products can be found online in the NatureWorks' Ingeo LookBook. Follow NatureWorks on Twitter (@natureworks) for the latest updates. The international Ingeo users' forum Innovation Takes Root will be held February 17-19, 2014, in Orlando, Florida.

About NatureWorks

NatureWorks LLC is a company dedicated to meeting the world's needs today without compromising the earth's ability to meet the needs of tomorrow. NatureWorks LLC is the first company to offer a family of commercially available, low-carbon-footprint Ingeo™ lactides and biopolymers derived from 100 percent annually renewable resources with performance and economics that compete with oil-based intermediates, plastics, and fibers, and provide brand owners new cradle-to-cradle options after the use of their products. NatureWorks is jointly owned by Thailand's largest chemical producer, PTT Global Chemical, and Cargill, an international producer and marketer of food, agricultural, financial, and industrial products and services.

###

Ingeo and the Ingeo logo are trademarks or registered trademarks of NatureWorks LLC in the USA and other countries.

For Editorial Information

North America / Latin America

 Steve Sterling

Europe
 Steve Sterling

Asia Pacific
 Pauline Ning

Japan
 Daisuke Takabatake

In this Section

Where to Buy

Looking to buy Ingeo biopolymer?

See global distributors

Looking for products made with Ingeo?

See products from our partners